24000 Series

24000 Series

24000 Series

Description

Spherical roller bearings have two rows of rollers, a common sphered outer ring raceway and two inner ring raceways inclined at an angle to the bearing axis . The centre point of the sphere in the outer ring raceway is at the bearing axis. Therefore, these bearings are self-aligning and insensitive to misalignment of the shaft relative to the housing, which can be caused, for example, by shaft deflection. Spherical roller bearings are designed to accommodate heavy radial loads, as well as heavy axial loads in both directions.

Symmetrical rollers 

Symmetrical rollers self-adjust, providing optimal load distribution along the roller length. This keeps stresses low under all load conditions and extends bearing service life.

Roller tolerances 

The rollers in an spherical roller bearing are manufactured to extremely tight dimension and form tolerances. Each roller is practically identical in size and shape to the other rollers in the set. This optimizes load distribution over the rollers to maximize bearing service life.

Special roller profile 

The roller profile determines the stress distribution in the roller/raceway contact area. The special profile distributes loads more evenly along the rollers and prevents stress peaks at the roller ends to extend bearing service life .

Self-guiding rollers and a floating guide ring between the two rows of rollers 

Self-guiding rollers reduce friction and frictional heat. A floating guide ring guides unloaded rollers so that they enter the load zone in the optimal position.


selectInquiryDesignationPrincipal Dimensions(mm)Basic Load Ratings(KN)Limited Speed(rpm)Weight
dDBrs minDynamic(Cr)Static(Cor)GreaseOil(kg)
24024 120 180 60 2 390 670 1500 2300 5.48
24024K30 120 180 60 2 390 670 1500 2300 5.39
24024K30W33C3 120 180 60 2 390 670 1500 2300 5.39
24024W33C3 120 180 60 2 390 670 1500 2300 5.48
24026 130 200 69 2 505 895 1300 2100 8.08
24026K30 130 200 69 2 505 895 1300 2100 7.95
24026K30W33C3 130 200 69 2 505 895 1300 2100 7.95
24026W33C3 130 200 69 2 505 895 1300 2100 8.08
24028 140 210 69 2 510 945 1200 1900 8.57
24028K30 140 210 69 2 510 945 1200 1900 8.43
24028K30W33C3 140 210 69 2 510 945 1200 1900 8.43
24028W33C3 140 210 69 2 510 945 1200 1900 8.57
24030 150 225 75 2.1 585 1060 1200 1800 10.7
24030K30 150 225 75 2.1 585 1060 1200 1800 10.5
24030K30W33C3 150 225 75 2.1 585 1060 1200 1800 10.5
24030W33C3 150 225 75 2.1 585 1060 1200 1800 10.7
24032 160 240 80 2.1 650 1200 1100 1700 13
24032K30 160 240 80 2.1 650 1200 1100 1700 12.8
24032K30W33C3 160 240 80 2.1 650 1200 1100 1700 12.8
24032W33C3 160 240 80 2.1 650 1200 1100 1700 13
24034 170 260 90 2.1 800 1470 1000 1600 17.7
24034K30 170 260 90 2.1 800 1470 1000 1600 17.4
24034K30W33C3 170 260 90 2.1 800 1470 1000 1600 17.4
24034W33C3 170 260 90 2.1 800 1470 1000 1600 17.7
24036 180 280 100 2.1 965 1770 950 1500 23.3
24036K30 180 280 100 2.1 965 1770 950 1500 22.9
24036K30W33C3 180 280 100 2.1 965 1770 950 1500 22.9
24036W33C3 180 280 100 2.1 965 1770 950 1500 23.3
24038 190 290 100 2.1 995 1850 900 1400 24.3
24038K30 190 290 100 2.1 995 1850 900 1400 23.9
Previous12Next